Heatsinks

A place to discuss any hardware issues you are having with your CrowPi
Post Reply
Stevengms
Posts: 3
Joined: Wed May 26, 2021 4:09 pm

Heatsinks

Post by Stevengms »

My CrowPi came with 3 heatsinks but no directions as to where they should go. I could guess but rather ask than get it wrong.
g7jjf
Posts: 21
Joined: Mon Apr 06, 2020 1:19 pm

Re: Heatsinks

Post by g7jjf »

According to the Elecrow website at https://www.elecrow.com/heatsink-kit-for-rpi-p-750.html, I assume they go on the chips as shown in the picture below :

RPI-heatsink_pro.jpg
RPI-heatsink_pro.jpg (66.44 KiB) Viewed 3094 times
Stevengms
Posts: 3
Joined: Wed May 26, 2021 4:09 pm

Re: Heatsinks

Post by Stevengms »

Many thanks for the help. It certainly cleared up most of the issues. However, there is a small matter of a fan that came with the CrowPI. The leads on the fan do not give much of a clue. Any ideas? Stevengms
g7jjf
Posts: 21
Joined: Mon Apr 06, 2020 1:19 pm

Re: Heatsinks

Post by g7jjf »

Sorry but my CrowPi didn't come with a fan so I can't help you with this. If no fitting instructions came with your kit then I would suggest contacting elecrow support direct at https://www.elecrow.com/contacts
Post Reply